Tuesday, January 3, 2012
Wednesday, June 8, 2011
Thursday, March 31, 2011
2011 Kicherer Mercedes-Benz GL 42 Sport Black
The KICHERER GL 42 Sport Black special edition based on a Mercedes Benz GL 420 CDI is powered accordingly by a 4.2 liter V8 common rail turbo diesel engine; in the series state, it has 306 HP and 700 Newton meters as maximum torque. The performance improvement by KICHERER provides the GL 42 Sport Black with a full 380 HP and 900 Newton meters on the thick crankshaft. The additionally installed KICHERER PowerConverter also sharpens the electronic gas pedal characteristic curve, causing the heavy vehicle to react even more spontaneously to acceleration commands and enabling powerful acceleration from the very bottom. The two end pipes of the two-pipe sports exhaust system give off a deeply evil roar.
The serial Airmatic chassis was also given a more sportive characteristic curve, making the GL 42 Sport Black comparatively light on it wheels when going around bends of any size. The Vogue complete wheel set consisting of 10×22 inch wheel rims and XXL size 295/35R22 tires also essentially contributes to the new driving dynamics.
For a sportive look, KICHERER retrofitted the GL 42 Sport Black, which is completely covered in matte black exclusive foil, with its own off-road package. The grille and all the Mercedes stars and decorative strips are now black to perfect the SUV’s “bad boy” look. KICHERER also improved the cockpit with the contoured ergonomic sports steering wheel.
For a sportive look, KICHERER retrofitted the GL 42 Sport Black, which is completely covered in matte black exclusive foil, with its own off-road package. The grille and all the Mercedes stars and decorative strips are now black to perfect the SUV’s “bad boy” look. KICHERER also improved the cockpit with the contoured ergonomic sports steering wheel.
Saturday, January 29, 2011
2012 Nissan GT-R SpecV
Modifications applicable only to the Nissan GT-R SpecV are as follows: Engine modifications are the same as the base model with improved maximum power output and torque, as well as enhanced fuel economy, except maximum torque is improved to 612Nm(62.5kgfm)/ 3,200?6,000rpm (632Nm(64.5kgfm)/ 3,600?5,600rpm). (Figures in parenthesis are when high geared boost is used.)
To improve abrasion resistance and stability in racing circuit driving, rear brake pad material is changed and VDC (Vehicle Dynamic Control) balance under braking is modified. Dunlop SP SPORT MAXX GT 600 DSST CTT tire is adopted as a standard feature. Special Rays lightweight aluminum forging wheels for the SpecV are adopted from the previous model with the color changed to Metallic Black.
2011 Toyota Tacoma X-Runner RTR
The Tacoma X-Runner RTR achieves its performance credentials by dropping in a completely stock, current-generation Tundra 5.7-liter V8 engine into the unmodified engine bay along with a six-speed automatic transmission. A Toyota Racing Development (TRD) Supercharger Kit was added, bringing the SAE certified power stats to 504 horsepower and 550 lb.-ft. of torque. The truck runs on premium gas rather than race fuel.
A stock Tundra rear axle, with a 4.3 ratio and 10.5-inch ring gear, was narrowed a total of 5.7 inches to Tacoma rear-track width). A TRD prototype mechanical limited slip differential, designed by Eaton, was added to maximize traction. The truck rides on current generation Tacoma 15-inch styled steel wheels that were modified to 10-inches wide in the rear and wrapped by 30×11.5×15-inch Goodyear Eagle Dragway Specials. The front wheels are 4.5-inches wide and mounted to 28×4.5×15-inch Goodyear Eagle Front Runners.
The Tacoma X-Runner RTR was lowered approximately 4.5 inches from stock X-Runner height, and a custom exhaust system was fabricated to include two TRD perforated-chamber mufflers with a 3.5-inch pipe. The only body modification to the X-Runner RTR was the relocation of the exhaust outlet from behind the passenger-side rear wheel to underneath the cab to help maximize rear-suspension compression, which is common in hard launches. The brakes were left untouched from the stock Tacoma X-Runner braking system, and vehicle traction aids are still functional, including ABS, Vehicle Stability Control and traction control.
The exterior body panels of the Tacoma X-Runner remain untouched. A silver and red paint scheme applied by Five-Axis was inspired by classic low cost but ready-to-race sports cars, including the late 1960s Dan Gurney Cougar XR7-G. The number “95″ on the doors signifies the first model year the Tacoma nameplate was sold in the U.S. The Tundra i-Force engine badge was painted on the front fenders to signify the upgraded power plant and is in the same location it would be found on the current Tundra. In classic hot rod style, the hood is adorned with “504 HP” graphics signifying the SAE verified horsepower. Also on the hood, and unique to this build, is a TRD Supercharger graphic featuring a tornado, signifying the forced induction. The side rocker panels feature the X-Runner logo.
Inside, all non-essential equipment was removed to make the vehicle as light as possible, including the audio head unit, speakers, air conditioner, power windows, front fog lamps, windshield water bottle, and rear seats. The stock front seats remain but are covered with classic Toyota fabric trim found on 1980s era vehicles. Added interior features include a custom TRD steering wheel, Tundra stock accelerator and brake pedals, and a stock Tundra gated shifter with sport shift mode. A TRD designed removable roll bar was also installed.
Thursday, January 27, 2011
2010 Suzuki R3 Concept MPV
The Suzuki Concept R3 model is a Compact Multi Purpose Vehicle (MPV) for such people. Designed by Maruti Suzuki India’s Research and Development Department, it combines compact dimensions with a stylish profiling. The Concept compact MPV accommodates six people in three rows.
The 6-seater Concept MPV is an all-new compact vehicle completely different from any of the existing cars from the Maruti Suzuki family and hitherto unseen at any auto international show. Concept R3 has been conceptualized, designed and built from the scratch by a team of talented Indian designers in India over a short time span of nine months. It represents the next level of skill enhancement of Maruti Suzuki engineers.
Gold & Diamonds Fiat 500C by Fenice Milan priced at 500,000 EUR
After the great interest achieved from the presentation on the market in September 2010, Fenice Milano receives a commission from a wealthy Chinese businessman to build a special version of its “little one”, which adds exclusivity and determination to the retro charm of the initial project. The new, unique model was named “La Dolce Vita Gold and Diamonds 200hp”. A name that, by itself, sais it all and briefly describes the extraordinary budget that justifies a price of almost €500,000. Further improved in performance thanks to the recently established partnership with the famous car technician Romeo Ferraris – specialized in car engine modifications and road racing since 1959 – and enriched by the installation of new electronic devices such as the prestigious “Supreme gold and diamonds Ipad” produced by the English Atelier of Stuart Hughes.
The starting point for this event is the 500C Abarth, fully mechanically revised, to reach the extraordinary level of 200Hp, and whose precious finishes result in a real jewel of style and Made in Italy workmanship.
Thanks to its compact size (355cm long, 165cm wide and 149cm in height), this little jewel is ideal to comfortably move in the city, without sacrificing the luxury and exclusivity guaranteed by several inserts of precious materials, such as 24K gold and quality woods such as teak, entirely handmade by Fenice Milano’s artisans. Pleasure and excitement in driving are guaranteed, due to an increase of 68hp from the original, permitted by the new ECU and exclusive use of an increased turbine entirely developed by Romeo Ferraris’ Factory, combined with pipes and fittings made from scratch, as well as the complete exhaust system with 200-cells catalytic converter designed to improve engine performance. To add security, the brake system has also been completely revised, in order to balance the increased power obtained. The front axle has in fact been provided with an improved kit by Brembo equipped with adjustable dampers able to tame the exuberance of ‘La Dolce Vita’ and making it both safe and fun.
Inside, the redesigned steering wheel has the outer ring made of the teak and the interior one made in leather with controls in 24K gold, even the original carpet floor was replaced with teak. The console is embellished with a gold framed instrument panel and teak and 24K gold inserts dashboard, whose profiles are handshaped by Fenice Milano’s artisans.
The last major innovation provided in “La Dolce Vita Gold and Diamonds 200hp” is in fact the placing in central position of an Ipad Supreme Edition made in 24k gold and diamonds by English designer Stuart Hughes, specialized in developing technological applications in precious materials. Especially designed for those who want to make the most of innovation and exclusivity in the onboard control instruments, the space for the Ipad provides a complete interaction of the device with the car, which is fitted with a GPS navigation system, a last generation hi-fi that can handle MP3 and all Ipod features and also an internet connection run by wi-fi and a appropriate sim card.
The golden pearlescent white painting includes 24K gold particles. The electric hood is provided in technical natural colored fabric with gold thread finished. The redesigned seats are also sewn with the precious material, the interior elements are full grain leather and natural-colored Alcantara with handmade on sight stitching.
Subscribe to:
Posts (Atom)
LinkWithin
